3 Ways of Repairing Asphalt Drives

If you're looking for info about how to repair a damaged asphalt driveway, you've come to the right place. Here are three techniques that can be used to fix up asphalt so it is as good as new. Read on to discover more!

Applying Sealcoating

Sealcoating is typically the first way to fix a cracked or broken asphalt surface. It involves spreading coal tar over the damaged area and then using a roller to smooth it out before painting on an asphalt cement sealer. The coal tar has excellent restorative properties which can be used to repair the damage done to your driveway. It works by filling in the cracks and holes in your driveway so that you don't have to spend any more money replacing it. One major advantage of sealcoating is that it does not require any blending with existing asphalt surfaces which may already be showing signs of wear. This means that you can apply it without worrying about causing problems with your current driveway.

Application of the sealcoating has to be done very carefully. You may have to give the asphalt surface a few days to cure before you can paint on the asphalt cement sealer. This is because any cracks or holes will remain open unless they are sealed then covered with a layer of sealant. Sealcoat products are generally available at most hardware stores, although it is important that you read the instructions on the pack carefully before using them.

Using Patch Filling

The next way in which you can repair damaged asphalt is by patching it. If you have a cracked or broken asphalt surface, you can use asphalt cement to fill in the cracks and holes. The main downside with patching is that you are limited to the size of the crack or hole. As a result, if you have more than one crack or hole in your gravel driveway then you will have to make several patches to cover them all.

Carrying Out a Resurface

The third and final technique which you can use to repair damaged asphalt is by resurfacing. This method is not very popular because you must completely replace your existing asphalt surface with a new one. However, resurfacing is the best way to repair damaged asphalt because it will be completely flat and smooth. Resurfacing is not always a viable option, especially if your driveway has a lot of cracks and holes. It can also be quite costly due to the fact that you have to remove all of the old asphalt before laying down a new one.

For more information, contact an asphalt repair service.